Order: Cell: 207-214-6133 or trevor@rovahfarm.com
 
 

Series Trucks - Axles, Suspension and Steering
Page 5
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts
  Series axles, suspension & steering -
Page 1 <> Page 2 <> Page 3 <> Page 4 <> Page 5
     
 
 
     
     
  Rear Half Shaft RH  
  Ref: 591378 / Price $54.95  
  Application: 88" up to June 1980 - Shorter at 26"
 
 
  Rear Half Shaft LH  
  Ref: 591379 / Price $59.50  
  Application: 88" up to June 1980 - Longer at 34 3/4"
 
 
  Rear Half Shaft - RH  
  Ref: 576767 / Price $64.95  
  Application: Series III 109"
 
 
  Rear Half Shaft - LH  
  Ref: 576768 / Price $69.95  
  Application: Series III 109"
 
 
  Rear Half Shaft Post 1980 88" RH  
  Ref: FRC1644 / Price $45.95  
  Application: Series III post 1980 SWB RH - 10 inner splines and 24 outer
 
 
  Rear Half Shaft Post 1980 88" LH  
  Ref: FRC1645 / Price $45.95  
  Application: Series III post 1980 SWB LH - 10 inner splines and 24 outer
 
 
  Lightweight Rear Axle Shaft RH  
  Ref: 599530 / Price $64.95  
  Application: Lightweight - Pre 1980 - Flat End Type
   
 
 
  Lightweight Rear Axle Shaft LH  
  Ref: 599531 / Price $66.95  
  Application: Lightweight - Pre 1980 - Flat End Type
   
 
 
  Bolt - Set Bolt Differential etc.  
  Ref: 237339 / Price $2.39  
  Application: Series (all) Set bolt for differential
 
 
  Set Bolt  
  Ref: 272934 / Price $0.75  
  Application: Series (all) Set bolt for Crown Wheel
 
 
  Locker - for Ring and Pinion Bolts  
  Ref: 272922 / Price $2.75  
  Application: Series (all)
 
 
  Ring and Pinion Gear Set 4.7:1 (stock)  
  Ref: RTC2990 / Price $223.95  
  Application: Series (all) 1950 - 1984
 
 
  Differential Wheel & Pinion Kit - Matched Set  
  Ref: STC1768 / Price $225.00  
  Application: Series up to suffix 'B'
STC1768 is superceded from STC851 which is superceded from STC4486
 
 
  Differential Wheel & Pinion Kit - Salisbury Axle  
  Ref: RTC4488 / Price $364.95  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Pinion Gear  
  Ref: 607167 / Price $52.40  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Thrust Washer  
  Ref: 607168 / Price $6.95  
  Application: Salisbury Axle - Series and Defender
 
 
  Salisbury Thrust Washer  
  Ref: 607169 / Price $4.70  
  Application: Salisbury Axle - Series and Defender
 
 
  Cross Shaft - Differential  
  Ref: 599945 / Price $12.15  
  Application: Series 1975 on
 
 
  Circlip - Cross Shaft  
  Ref: CCN110L / Price $0.49  
  Application: post suffix 'B'
 
 
  Spring Pin  
  Ref: 576159 / Price $0.75  
  Application: Rover Differential - For the differential locking ring on the carrier bearings.
 
 
  Differential Pinion Shim 0.030  
  Ref: 539717 / Price $0.99  
  Application: Series 1965 - 1968
 
 
  Bearing - Taper Roller Diff Carrier - Timken or NTN  
  Ref: 41045G / Price $46.95  
  Application: Series IIa and early III, for late series III see RTC2726 (2 required)
 
 
  Bearing - Taper Roller Diff Carrier - Timken  
  Ref: RTC2726G / Price $23.45  
  Application: late series III, Defender to 2006, Disco I, RRClassic 1986-1994. Early Series see 41045 (2 required)
 
 
  Bearing - Taper Roller Differential - Allmakes  
  Ref: RTC2726 / Price $19.45  
  Application: late series III, Defender to 2006, Disco I, RRClassic 1986-1994
 
 
  Differential Pinion Inner Bearing  
  Ref: 219544 / Price $43.95  
  Application: Series Diff Housing Rover Axles front and rear. Suffix A
 
 
  Differential Pinion Inner Bearing - Timken  
  Ref: 539706T / Price $59.95  
  Application: Series Diff Housing 88" front and rear, and 109" front except 109 1 ton - Timken
 
 
  Differential Pinion Inner Bearing - Allmakes  
  Ref: 539706 / Price $26.30  
  Application: Series Diff Housing 88" front and rear, and 109" front except 109 1 ton
 
 
  Shim Final Drive - 0.040"  
  Ref: 549232 / Price $10.50  
  Application: Series Front and Rear Diffs - not Salisbury - Imperial shims
 
 
  Shim Final Drive - 0.042"  
  Ref: 549234 / Price $12.95  
  Application: Series Front and Rear Diffs - not Salisbury - Imperial shims
 
 
  Shim Final Drive - 0.044"  
  Ref: 549236 / Price $15.25  
  Application: Series Front and Rear Diffs - not Salisbury - Imperial shims
 
 
  Shim Final Drive - 0.046"  
  Ref: 549238 / Price $5.95  
  Application: Series Front and Rear Diffs - not Salisbury - Imperial shims
 
 
  Diff Pinion Outer Bearing - 'Timken'  
  Ref: 539707G / Price $33.95  
  Application: Series Diff Housing 88" front and rear, and 109" front except 109 1 ton - Timken brand
 
 
  Diff Spacer 'OE'  
  Ref: 539745 / Price $10.50  
  Application: Series Diff Housing 88" front and rear, 109" front except 109 1 ton
 
 
  Pinion Oil Seal - Corteco  
  Ref FRC4586G / Price $9.95  
  Application: Front and rear differential housing front and rear 88" and front 109" except 1 ton.
Description: outer diameter 2 3/4" inner 1 11/16" designed to meet Original Equipment Manufacturer specifications. Superceded from 217507
 
 
  Pinion Oil Seal  
  Ref FRC4586 / Price $3.95  
  Application: Front and rear differential housing front and rear 88" and front 109" except 1 ton.
High Quality Replacement Seal
 
 
  Locker - Diff Seal Retainer  
  Ref: 41049 / Price $4.75  
  Application: Series II & IIa
 
 
  Mud Shield 'OE'  
  Ref: 236072 / Price $10.65  
  Application: Series (all)
 
 
  Flange - Differential  
  Ref: 236632 / Price $20.95  
  Application: Series (all) Differential Flange - 4 spline
 
 
  Carrier Bearing - Salisbury Axle  
  Ref: 607187T / Price $67.23  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Carrier Bearing - Salisbury Axle  
  Ref: 607187 / Price $29.95  
  Application: Series and Defender Salisbury axle - Allmakes bearing
 
 
  Carrier Shim - Salisbury Axle 0.003"  
  Ref: 607188 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.005"  
  Ref: 607189 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.010"  
  Ref: 607190 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Carrier Shim - Salisbury Axle 0.030"  
  Ref: 607191 / Price $2.75  
  Application: Series and Defender Salisbury axle
 
 
  Pinion Bearing Inner - Salisbury Axle  
  Ref: 607180G / Price $52.42  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Pinion Bearing Inner - Salisbury Axle  
  Ref: 607180 / Price $26.50  
  Application: Series and Defender Salisbury axle - 'DPI' bearing
 
 
  Pinion Bearing Outer - Salisbury Axle - 'TIMKEN'  
  Ref: 607181G / Price $37.50  
  Application: Series and Defender Salisbury axle - Timken bearing
 
 
  Pinion Bearing Outer - Salisbury Axle  
  Ref: 607181 / Price $22.95  
  Application: Series and Defender Salisbury axle - Allmakes NIS bearing
 
 
  Spacer - Collapsible  
  Ref: 607197 / Price $11.90  
  Application: Series Salisbury
 
 
  Oil Thrower - Salisbury  
  Ref: 607182 / Price $4.95  
  Application: Series Salisbury
 
 
  Gasket - Pinion Oil Seal - Salisbury  
  Ref: 607183 / Price $2.25  
  Application: Series salisbury axle. Defender > 2006
Description: O/D 4 1/8" I/D 2 3/4"
 
 
  Pinion Oil Seal Salisbury Axle - Leather  
  Ref: AEU2515 / Price $7.46  
  Application: Rear casing 109" Salisbury Axle, Defender to WA159806
Description: Metal and Leather pinion oil seal. Outer diameter 3 1/8" inner 2''
 
 
  Pinion Oil Seal Salisbury Axle - Rubber  
  Ref: AEU2515R / Price $5.95  
  Application: Rear casing 109" Salisbury Axle, Defender to WA159806
Description: Metal and Rubber pinion oil seal. Outer diameter 3 1/8" inner 2''
 
 
  Flange Kit - Salisbury Axle  
 

Ref: STC4403 / Price $97.90

  
  Application: Series: Salisbury Differential from XA159807
 
 
  Flange - Salisbury Differential  
  Ref: 607185 / Price $49.95  
  Application: Series: Salisbury Differential
 
 
  Washer - Salisbury  
  Ref: 607357GEN / Price $8.25  
  Application: Salisbury Axle - Washer for flange nut
 
 
  Pinion Locknut - Salisbury  
  Ref: 90608545 / Price $19.50  
  Application: Series Salisbury Axle
 
 
  Differential Cover - Front  
  Ref: DA1043 / Price $74.95  
  Application: Land Rover Series (all) - includes filler plug
 
 
  Differential Cover - Rear  
  Ref: DA1044 / Price $74.95  
  Application: Land Rover Series (all) - includes filler plug
 
 
  Differential Stud - Axle Case  
  Ref: 561195 / Price $1.40  
  Application: Axle Case to Differential - not Salisbury - 3/8 UNF X 1 1/4"
 
 
  Differential Stud  
  Ref: 561196 / Price $1.52  
  Application: Axle Case to Differential - not Salisbury - 3/8 UNF X 1 3/4"
 
 
  Differential Gasket  
  Ref: 7316 / Price $1.99  
  Application: Series (all), Defender (all), Disco I >'98, Range Rover Classic MY '86-'91 & MY '92-'94
 
 
  Salisbury Differential Cover  
  Ref: RTC844 / Price $142.95  
  Application: Series
 
 
  ARB Salisbury Differential Cover  
  Ref: DA8926 / Price $299.00  
  Application: Series - High Tensile Bolts Supplied. Magnets on dipstick and fill plug
 
 
  Differential Gasket - Salisbury  
  Ref: RTC1139 / Price $2.95  
  Application: Series with Salisbury rear axle and Defender 1987>
 
 
  Differential Nose Joint Washer  
  Ref: 553412 / Price $  
  Application: Series II & IIa vehicle suffix A to G - Call for availability and price
 
 
  Washer Sealing - Copper  
  Ref: 515599 / Price $1.25  
  Application: Series 88" front and rear axle casing, Series 109" and 109" 1 ton front axle casing
 
 
  Drain Plug - Slotted  
  Ref: 235592 / Price $23.95  
  Application: Axle / Fuel Tank / Transfer Casing Drain Plug - Use sealing washer FRC4809 - See tool BA 5443
 
 
  Drain Plug - Hex  
  Ref: 540870 / Price $11.95  
  Application: Axle / Fuel Tank / Transfer Casing Drain Plug - Use sealing washer FRC4809
   
 
 
  Drain / Fill Plug  
  Ref: 608246 / Price $5.99  
  Application: Series
 
 
  Drain Plug Magnetic  
  Ref: TYB500120 / Price $17.80  
  Application: Series
 
 
  Washer - Sealing  
  Ref: FRC4809 / Price $1.75  
  Application: Series - use with 235592 slotted drain plug
 
 
  Washer Drain Plug  
  Ref: FRC4835 / Price $1.30  
 

Application: Series II & IIa, washer for drain plug differential housing
Also 109 V8 Main and Transfer Casing
Description: Sealing washer ID 1.0" OD 1.5"
 
 
     
 
 
     
  Series axles, suspension & steering -
Page 1 <> Page 2 <> Page 3 <> Page 4 <> Page 5
   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts