Order: Cell: 207-214-6133 or trevor@rovahfarm.com
 

  Series Trucks - Brakes and Brake Controls
Page 1
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts
   
  Series Brakes Page 1 <> Page 2 <> Page 3  
     
     
  Brake Servo  
  Ref STC1816 / Price $155.95  
  Application: Series (all)

 
 
  Brake Servo Repair Kit - Britpart  
  Ref: 18G8951L / Price $34.95  
  Application: Series (all) Brake Servo 569338 and AEU1043 minor overhaul kit

 
 
  Brake Servo Non Return Valve  
  Ref: 18G8953L / Price $48.95  
  Application: Late IIA and SIII

 
 
  Vacuum Hose  
  Ref: CRC2131 / Price $16.45  
  Application: Series - 930mm or 37" length - From Servo to Manifold

 
 
  Vacuum Pipe for Brake Servo  
  Ref: 569714 / Price $42.95  
  Application: Series (all)

 
 
  Union Servo Pipe - NLA  
  Ref: 90513171 / Price $17.95  
  Application: Series (all)
 
 
  Vacuum Loss Switch  
  Ref: 589219 / Price $34.95  
  Application: Certain export models

 
 
  Brake Master Cylinder 'CB' Series 2 & early 2a 88"  
  Ref: 520849 / Price $79.95  
  Application: Series 2 and early 2a SWB 88"
Known as the 'CB' (compression barrel) for models with non-servo brakes uses remote reservoir. Approximate dimensions: Length of body 5 1/4", bore 7/8", mounting centers 2 1/4"

 
 
  Rebuild Kit Ref STC1116 / Price $4.86

 
 
  Brake Master Cylinder 'CB' Series 2 & early 2a 109"  
  Ref: 564706 / Price $78.50  
  Application: Series 2 and early 2a SWB 109"
Known as the 'CB' (compression barrel) for models with non-servo brakes uses remote reservoir. Approximate dimensions: Length of body 6", bore 1 1/8", mounting centers 2 1/2"

 
 
  Rebuild Kit Ref 605127 / Price $6.15

 
 
  Adaptor  
  Ref: 139082 / Price $8.95  
  Application: Series Clutch and Brake Master Cylinder Adapter - 3/8" UNF male to 7/16" UNF female - use copper washer 233220 to seal

 
 
  Lucas CV Brake Master Cylinder Series 2a & 3  
  Ref: 90569126G / Price: $98.95  
 

Application: Series 2A and Series 3 SWB (88") models with non-servo brakes, uses remote reservoir. Description: Lucas - TRW clutch master cylinder with cast iron body. Also used as clutch master on 2A - see clutch section. Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centers 57mm or 2 1/4 ".

 

 
 
  Replacement CV Brake Master Cylinder S2A & S3  
  Ref: 90569126 / Price: $34.95  
  Application: Series 2A and Series 3 SWB (88") models with non-servo brakes, uses remote reservoir. Description: Replacement brake master cylinder with cast iron body. Also used as clutch master on 2A - see clutch section. Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centers 57mm or 2 1/4"". 

 
 
  CV Master Rebuild Kit "TRW"  
  Ref: STC500090G / Price $22.50  
  CV Rebuild Kit superceded from 8G8837L

 
 
  CV Master Rebuild Kit  
  Ref: STC500090 / Price $4.00  
  CV Rebuild Kit superceded from 8G8837L

 
 
  Gasket / Spacer  
  Ref: 592358 / Price $3.95  
  Application: Use with brake masters 90569126 and 520849

 
 
  Replacement Brake Master Cylinder S2A & S3 109"  
  Ref: 90569128 / Price: $42.95  
 

Application: 109" non-servo vehicles 'CV' type cylinder. Description: Replacement single line brake master cylinder for use with remote reservoir. Approximate dimensions: Length excluding pushrod 143mm (5.63"), bore 28.6mm (1.125"), mounting hole centers 63.5mm (2.5"). 

Rebuild Kit Ref: 90606023 Price $5.62

 
 
  Supply Reservoir - Single  
  Ref: 271581 / Price $89.95  
  Application: Series - Remote Reservoir - Single - Metal Cap

 
 
  Supply Reservoir - Double  
  Ref: 504105G / Price $285.00  
  Application: Series - Remote Reservoir - Double - Metal Cap - Original Design

 
 
  Reservoir Tank Kit  
  Ref: 504105 / Price $187.95  
  Application: Series - Remote Reservoir Vehicles - Comes with bracket

 
 
  Replacement Brake Master Cylinder  
  Ref: 569339 / Price $64.95  
  Application: Series trucks using brake servo and single line system. Distance across mounting centres 3.15" - Allmakes

 
 
  Rebuild Kit for 569339  
  Ref: 606415 / Price $3.99  
  Application: Series trucks using a single line servo assisted brake system

 
 
  Brake Master Cylinder Filter  
  Ref: 592325 / Price $3.99  
  Application: Series III - fits external reservoir 90577636

 
 
  Replacement Brake Master Cylinder S2A & S3 88"  
 

Ref: 569671 / Price: $124.95

 
  Application: 88" dual line system up to 1980. Standard on North America spec vehicles, optional in other markets. Description: Replacement dual line brake master cylinder with cast iron body.
Can be distinguished from post 1980 dual line master cylinder by the vertical retaining screws for the reservoir. Approximate dimensions: Length 181mm (7.16"), bore 22.2mm (0.875"), mounting centers 80mm ( 3.15").

 
 
  Rebuild Kit for 569671 - 'TRW' NLA  
  Ref: 90606422 / Price $29.95  
  Application: Series 88" Brake Master Cylinder Rebuild Kit
 
 
  Brake Master Reservoir Kit - 'GIRLING' NLA  
  Ref: 64947076 / Price  
  Application: Series III - 88" and 109" for Master Cylinder 569671 and 90577520 - Consists of new reservoir, cap, sealing washers and screws
 
 
  Replacement Brake Master Cylinder S2A & S3 109"  
  Ref: 90577520 / Price: $119.95  
  Application: 109" dual line system up to 1980. Standard on North America spec vehicles, optional in other markets. Description: Replacement dual line brake master cylinder with cast iron body.
Can be distinguished from post 1980 dual line master cylinder by the vertical retaining screws for the reservoir. Approximate dimensions: Length 181mm (7.16"), bore 25.4mm (1"), mounting centers 80mm ( 3.15").

 
 
  Rebuild Kit for 90577520 'TRW'  
  Ref: 607726G / Price $64.95  
  Application: Dual Line Master with Servo - Rebuild Kit - Recommended for Lucas Master

 
 
  Rebuild Kit for 90577520  
  Ref: 607726 / Price $21.95  
  Application: Dual Line Master with Servo - Rebuild Kit

 
 
  Brake Master Cylinder  
  Ref: NRC6096 / Price $99.00  
  Application: Series - Dual Line System with Servo. Metric fitting rear M12 - Cylinder Bore 1 1/16"

 
 
  Brake Master Cylinder  
  Ref: NRC8690 / Price $66.95  
  Application: Post 1980 Series 109" and Defender 110 up to HA901219. Metric M12 rear, 3/8 24UNF front - for dual line system - a cheaper solution to the more expensive Lucas NRC6096 - Cylinder Bore 1"

 
 
  Brake Master Reservoir Kit - Britpart  
  Ref: AEU1045 / Price $46.95  
  Application: Series III - 88" and 109" for Master Cylinder NRC6096 and NRC8690 - Consists of new reservoir, cap, sealing washers and spring pins

 
 
  Brake Master Repair Kit  
  Ref: AEU1047 / Price $7.95  
 

Application: For Master Cylinder NRC6096

Series III 88" and 109" post 1980 metric
109" V8 from 1984


 
 
  Cap - Fluid Reservoir  
  Ref: SJL500030 / Price $5.25  
  Application: Brake Reservoir Cap - Superceded from STC976 and AAU7965

 
 
  Lucas/TRW Wheel Cylinder S2A & S3    
  Ref: 243296G / Price: $57.95  
  Application: Front right hand cylinder on SWB models to 1980, rear RH wheel cylinder on SWB models from 1980 onwards. Rear RH wheel cylinder on all 109 models. Main casting is of Aluminum.

 
  Lockheed Delphi Wheel Cylinder S2a & S3  
  Ref: 243296D / Price: $34.50
  Application: Front right hand cylinder on SWB models to 1980, rear RH wheel cylinder on SWB models from 1980 onwards. Rear RH wheel cylinder on all 109 models. Main casting is of cast iron.

 
 
  Wheel Cylinder S2a & S3  
  Ref: 243296 / Price: $21.95
  Application: Front right hand cylinder on SWB models to 1980, rear RH wheel cylinder on SWB models from 1980 onwards. Rear RH wheel cylinder on all 109 models. Main casting is of aluminum.

 
 
  Luca/TRW Wheel Cylinder S2A & S3  
  Ref: 243297G / Price: $57.95  
  Application: Front left hand cylinder on SWB models to 1980, rear LH wheel cylinder on SWB models from 1980 onwards. Rear LH wheel cylinder on all 109 models. Main casting is of Aluminum.


 
 
  Lockheed Delphi Wheel Cylinder S2A & S3  
  Ref: 243297D / Price: $34.50  
  Application: Front left hand cylinder on SWB models to 1980, rear LH wheel cylinder on SWB models from 1980 onwards. Rear LH wheel cylinder on all 109 models. Main casting is of cast iron.


Lockheed Delphi Wheel Cylinder SIIA & SIII
   
 
    Wheel Cylinder S2a & S3  
    Ref: 243297 / Price: $21.95
    Application: Front left hand cylinder on SWB models to 1980, rear LH wheel cylinder on SWB models from 1980 onwards. Rear LH wheel cylinder on all 109 models. Main casting is of aluminum.

   
 
    Brake Cylinder Overhaul Kit for 243296 & 243297  
    Ref: 275744 / Price: $6.75  
    Kit for front 88" 10" and 11" Rear Drums. Enough seals for one axle.

   
 
    TRW Wheel Cylinder S2A & S3  
    Ref: 243302G / Price: $98.95  
    Application: 88 inch wheel base rear RH to 1980. Used with 10 inch brake drums. Description: Cast iron wheel cylinder by TRW.

   
 
    Lockheed Delphi Wheel Cylinder S2A & S3  
    Ref: 243302D / Price: $29.95  
    Application: 88 inch wheel base rear RH to 1980. Used with 10 inch brake drums. Description: Cast iron wheel cylinder by Lockheed Delphi.

Lockheed Delphi Wheel Cylinder SIIA & SIII
 
 
  Wheel Cylinder S2A & S3  
  Ref: 243302 / Price: $21.95  
  Application: 88 inch wheel base rear RH to 1980. Used with 10 inch brake drums.

 
 
  TRW Wheel Cylinder S2A & S3  
  Ref: 243303G / Price: $98.95  
  Application: 88 inch wheel base rear LH to 1980. Used with 10 inch brake drums. Description: Cast iron wheel cylinder by TRW.

 
 
  Lockheed Delphi Wheel Cylinder S2A & S3  
  Ref: 243303D / Price: $29.95  
  Application: 88 inch wheel base rear left hand to 1980. Used in 10 inch drums. Description: Cast iron wheel cylinder by Lockheed Delphi.

 
 
  Wheel Cylinder S2A & S3  
  Ref: 243303 / Price: $21.95  
  Application: 88 inch wheel base rear left hand to 1980. Used in 10 inch drums.

 
 
  Brake Cylinder Overhaul Kit for 243302 & 243303  
  Ref: 266687 / Price: $7.58  
  Kit for rear 88" 10" Drums. Enough seals for one axle.

 
 
  Lucas Wheel Cylinder Series 2A & 3  
  Ref: 243743G / Price: $39.50  
  Application: 109 4cylinder front left hand wheel cylinder. 2 needed per wheel. Also 88" front left hand wheel cylinder from 1980 onwards. Description: Lucas single piston wheel cylinder with cast iron body.

 
 
  Lockheed Delphi Wheel Cylinder Series 2A & 3  
  Ref: 243743D / Price: $27.95  
  Application: 109 4cylinder front left hand wheel cylinder. 2 needed per wheel. Also 88" front left hand wheel cylinder from 1980 onwards.
Description: Lockheed Delphi LW30360 single piston wheel cylinder with cast iron body.

.
Lockheed Delphi Wheel Cylinder SIIA & SIII
 
 
  Wheel Cylinder Series 2A & 3 - Allmakes  
  Ref: 243743 / Price: $19.95  
  Application: 109 4cylinder front left hand wheel cylinder. 2 needed per wheel. Also 88" front left hand wheel cylinder from 1980 onwards.
Description: Single piston wheel cylinder with cast aluminum body. Does not include bleed nipple

 
 
  Lucas Wheel Cylinder Series 2A &3    
  Ref: 243744G / Price: $39.50  
  Application: 109 4cylinder front right hand wheel cylinder. 2 needed per wheel. Also 88" front right hand wheel cylinder from 1980 onwards. Description: Lucas single piston wheel cylinder with cast iron body.

 
 
  Lockheed Delphi Wheel Cylinder S2A & S3  
  Ref: 243744D / Price: $27.95  
  Application: 109 4cylinder front right hand wheel cylinder. 2 needed per wheel. Also 88" front right hand wheel cylinder from 1980 onwards. Description: Lockheed Delphi LW30361 single piston wheel cylinder with cast iron body.
 
Lockheed Delphi Wheel Cylinder SIIA & SIII
 
 
  Wheel Cylinder Series 2A & 3 - Allmakes  
  Ref: 243744 / Price: $19.95  
  Application: 109 4cylinder front right hand wheel cylinder. 2 needed per wheel. Also 88" front right hand wheel cylinder from 1980 onwards.
Description: Single piston wheel cylinder with cast aluminum body. Does not include bleed nipple

 
 
  Brake Cylinder Overhaul Kit for 243743 & 243744  
  Ref: 266684 / Price $9.72  
 

Application: Ser III 109" and 88" > 1980 Frt 11" Drums, enough seals for one axle


 
 
  Wheel Cylinder - Front LH  
  Ref: 600200 / Price $26.95  
  Application: Series III 2.6 and V8 3.5L - 2 required - uses bolt SH605041L to attach

 
 
  Wheel Cylinder - Front RH  
  Ref: 600201 / Price $26.95  
  Application: Series III 2.6 and V8 3.5L - 2 required - uses bolt SH605041L to attach

 
 
  Brake Cylinder Overhaul Kit for 600200 & 600201  
  Ref: 600210 / Price $9.72  
  Application: Ser III 2.6L and V8 3.5L. Enough seals for one axle


 
 
  Brake Cylinder Bleed Screw  
  Ref: 556508 / Price $1.95  
  Application: Series (all)

 
 
  Bleed Screw Dust Cap  
  Ref: 594091 / Price $0.55  
  Application: Series (all)

 
 
  Nut 5/16 UNF  
  Ref: NH605041L / Price $0.45  
  Application: series (all) for attaching brake cylinders

 
 
  Locking Washer  
  Ref: WM600051L / Price $0.35  
  Application: series (all) for attaching brake cylinders

 
 
     
  Series Brakes Page 1 <> Page 2 <> Page 3  
   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts