Land Rover Parts for Series Defender Discovery Range Rover Freelander

.
            

  Order: 501-562-0337 or trevor@rovahfarm.com

 Defender - Flywheel and Clutch

   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.
     
 
 
   
  Pedal Box Inspection Plate  
  Ref: 272713 / Price $23.95  
  Application: Defender
 
 
  Pedal Box Inspection Plate Gasket  
  Ref: 272819 / Price $2.49  
  Application: Defender 90/110
 
 
  Pivot Pin  
  Ref: 272712 / Price $45.95  
  Application: Defender Pivot Pin
 
 
  Clutch Pedal Return Spring  
  Ref: 569701 / Price $2.45  
  Application: Defender to LA939891
 
 
  Clutch Pedal Return Spring Assist Kit  
  Ref: DA1266 / Price $38.95  
  Application: Defender from LA939892
 
 
  Clutch Pedal Return Spring  
  Ref: EDP7510L / Price $21.95  
  Application: Defender from LA939892
 
 
  Bush  
  Ref: 272714 / Price $10.95  
  Application: Defender pedal bush
 
 
  Flywheel Housing Drain Plug  
  Ref: UYP500090 / Price $1.75  
  Application: Defender Drain Plug, Flywheel Cover for 2.25 and 2.5 petrol, 2.5NA 2.5TD, 200 and 300TDI. Front Cover Drain Plug for the 2.5NA and 2.5TD. Superceded from ERC7295
 
 
  Set Screw - 3/8UNF X 3/4  
  Ref: SH606061L / Price $1.49  
  Application: Defender, Clutch Pressure Plate to Flywheel V8
 
 
  Clutch Pressure Plate  
  Ref: 576557G / Price $139.95  
  Application: Defender early 2.25, and 2.5 petrol models. 9 I/2" diameter clutch plate, Quinton Hazell (QP). Use with 8510307
 
 
  Clutch Pressure Plate 'Britpart'  
  Ref: 576557 / Price $115.95  
  Application: Late Series IIa and Series III for 9 I/2" diameter clutch plate. For use with full synchromesh gearbox
 
 
  Clutch Plate 2.25 Petrol  
  Ref: 8510307G / Price $134.95  
  Application: Defender 2.25L and 2.5L Petrol - S/s from FRC2671, FTC3196, FTC4661
 
 
  Clutch Pressure Plate - 'VALEO'  
  Ref: URB100760G / Price $109.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5
 
 
  Clutch Pressure Plate 'AP'  
  Ref: URB100760BB / Price $114.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5
 
 
  Clutch Friction Plate - Britpart  
  Ref: UQB000130 / Price $79.00  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Superceded from FTC1994. Friction material edge to edge approx 39mm. Diameter 9.5"
 
 
  Clutch Friction Plate 'VALEO' HD  
  Ref: UQB000130G / Price $140.00  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Superceded from FTC1994. Friction material edge to edge approx 39mm - Stronger springs and stronger rivets than the UQB000130 - Diameter 9.5"
 
 
  Clutch Friction Plate 'Valeo'  
  Ref: FTC148G / Price $125.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5. Friction material edge to edge approx 34mm
 
 
  Clutch Friction Plate 'AP'  
  Ref: FTC148 / Price $115.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Friction material edge to edge approx 34mm
 
 
  Clutch Friction Plate 'Britpart'  
  Ref: FTC148 / Price $54.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Friction material edge to edge approx 34mm

 
 
 
  Clutch Friction Plate 'Valeo'  
  Ref: UQB500030G / Price $129.95  
  Application: Defender - Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Friction material edge to edge approx 34mm - Valeo - 4 large springs with inner helper springs - Superceded from FTC2149 and FTC4204.
 
 
  Clutch Kit - 'Valeo' - Heavy Duty 9.5"  
  Ref: LR009366HDV / Price $279.00  
  Application: Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Kit contains, friction plate, pressure plate and NSK release bearing - S/s from STC8358
 
 
  Clutch Kit - 'Valeo' - 9.5"  
  Ref: LR009366G / Price $259.95  
  Application: Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Kit contains, friction plate, pressure plate and NSK release bearing - S/s from STC8358
 
 
  Clutch Kit - 'AP' 9.5"  
  Ref: LR009366BB / Price $239.95  
  Application: Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Kit contains, friction plate, pressure plate and release bearing - S/s from STC8358
 
 
  Clutch Kit - 'Britpart' 9.5"  
  Ref: LR009366 / Price $164.95  
  Application: Fits all diesel 4 cylinders. 2.5NA, TD, 200TDI and 300 TDI not TD5 - Kit contains, friction plate, pressure plate and NSK release bearing - S/s from STC8358
 
 
  Clutch Kit 'AP'  
  Ref: 8510310 / Price $245.00  
  Application: Defender V8 and NAS - Pressure Plate and Friction Disc only, now includes throwout bearing
 
 
  Clutch Pressure Plate  
  Ref: 576476G / Price $189.95  
  Application: Defender 1983 onwards manual V8 Twin Carb and EFI and NAS. AP Driveline works with FRC9733 and 8510308
 
 
  Clutch Plate 3.5 V8 Twin Carb  
  Ref: FRC9773G / Price $105.95  
  Application: Series 109 3.5 V8 as well as early Defender and Range Rover Classic, diameter 10.5" by Quinton Hazell (QP)
 
 
  Clutch Driven Plate - V8 EFI  
  Ref: 8510308 / Price $106.95  
  Application: Defender 1987> 10.5" plate S/s of FTC4662. FTC160
 
 
  Timing Cover Gasket  
  Ref: 50216 / Price $0.29  
  Application: Defender 2.5NA to MA962814 Flywheel Housing Timing Cover Gasket
 
 
  Ring Gear 'OE'  
  Ref: 568431 / Price $99.00  
  Application: Defender 2.25 diesel, 2.5NA, 2.5TD and 200TDI and 300TDI
 
 
  Locating Dowel - Flywheel  
  Ref: 502116 / Price $0.85  
  Application: Defender 2.25, 2.5L and 200/300 TDI
 
 
  Bolt - Flywheel to Crankshaft  
  Ref: ERR4574 / Price $6.95  
  Application: Defender 2.25 and 2.5 Petrol, 2.5NA, 2.5TD, 200 and 300TDI - Superceded from ERC6551
 
 
  Bush - Flywheel  
  Ref: LFB500050 / Price $5.80  
  Application: Defender 2.25 petrol and diesel, 2.5NA, 2.5TD and 2.5 200 and 300 TDI - Supercedes from 8566L
 
 
  Bush - Flywheel and Crankshaft  
  Ref: 549911 / Price $7.25  
  Application: Defender V8
 
 
  Clutch Release Bearing  
 

Ref: FTC5200G / Price $31.95

 
  Application: Series 109 Stage One, Defender 1987> 2.25L Petrol, 200 & 300 TDI, Twin Carb V8, for LT 77 / 85 and R380, V8
Manufactured by NSK. For series 4 and 6 cylinder engines use FRC9568
 
 
  Clutch Release Bearing  
 

Ref: FTC5200 / Price $19.95

 
  Application: Defender 1987> 2.25L Petrol, 200 & 300 TDI, Twin Carb V8, for LT 77 / 85 and R380, V8

 
 
  Clutch Release Bearing  
 

Ref: UTJ100210 / Price $42.95

 
  Application: Defender - Used with the shorter bellhousing 'stumpy' - Also used on the 2.5 Petrol and Diesel with the R380 gearbox
   
 
 
  Pad - Clutch Release Lever Slipper  
  Ref: FRC5255 / Price $1.25  
  Application: Defender - LT77 4 Cylinder and R380 4 Cylinder TDI
 
 
  Pivot Plate - LT77  
  Ref: FRC5180 / Price $39.95  
  Application: Defender 4 Cylinder with LT77
 
 
  Clutch Release Guide  
  Ref: FTC5218 / Price $94.95  
  Application: Clutch release bearing guide for R380 4 cylinder TDI models
 
 
  Clutch Release Lever Arm 'OE'  
  Ref: FTC2957G / Price $26.95  
 

Application: Defender LT77 Gearbox up to LA939975, R380 TDI, S/s from FRC3326

 
 
  Clutch Release Lever Arm  
  Ref: FTC2957HDKIT / Price $33.75  
 

Application: Defender LT77 Gearbox up to LA939975, R380 TDI, S/s from FRC3326 - Includes slippers, clips and pilot bush

 
 
  Clutch Release Lever Arm  
  Ref: FTC2957 / Price $14.95  
 

Application: Defender LT77 Gearbox up to LA939975, R380 TDI, S/s from FRC3326

 
 
  Clutch Release Lever Arm Kit  
  Ref: 576137KIT / Price $91.95  
 

Application: Defender V8

 
 
  Clutch Release Lever Arm 'OE'  
  Ref: 576137 / Price $78.95  
 

Application: Defender V8

 
 
  Rod - Push  
  Ref: FRC3417 / Price $8.75  
  Application: 4 speed LT77 5 speed box
 
 
  Rod - Push  
  Ref: FTC3912 / Price $24.80  
  Application: TDI to (G) 56A 0669086K
 
 
  Rod - Push  
  Ref: FTC5199 / Price $15.50  
  Application: TDI from (G) 56A 0669087K
 
 
  Nylon Insert - Clutch Release Lever Arm  
  Ref: 571161 / Price $1.49  
  Application: Defender V8
 
 
  Clip  
  Ref: 571163 / Price $2.25  
  Application: Defender
 
 
  Staple  
 

Ref: 576203 / Price $0.89

 
  Application: Clutch mechanism throw out bearing - V8
 
 
  Staple - TDI  
 

Ref: FRC3416 / Price $0.89

 
  Application: Clutch mechanism throw out bearing - 2.5 petrol and diesel NA with R380, 200/300TDI
 
 
  Clip - Clutch Release  
  Ref: 576723 / Price $0.90  
  Application: V8
 
 
  Clip - Clutch Release  
  Ref: FRC3327 / Price $0.90  
  Application: Defender 4 cylinder models
 
 
  Clutch Alignment Tool  
  Ref: TLS3363 / Price $9.99  
  Application: Defender and Range Rover use with FRC9733 not TDI
 
 
  Adaptor  
  Ref: 139082 / Price $8.95  
  Application: Defender Clutch Master Cylinder Adapter - 3/8" UNF male to 7/16" UNF female - use copper washer 233220 to seal
 
 
  Clutch Master Cylinder - TRW  
  Ref:  STC500100G / Price $63.37  
 

Application: Defender 1983 to XA178602. Clutch master cylinder by
Lucas - TRW. Bore diameter 3/4" (19mm) - Superceded from 550732 and STC100411 - Use rebuild kit STC500090

 

 
 
  Clutch Master Cylinder  
  Ref:  STC500100 / Price:$26.95  
 

Application: Defender 1983 to XA178602. Can be retro fitted to Series 2A. Description: Aftermarket Clutch master cylinder from Allmakes. Bore diameter 3/4" (19mm) - Superceded from 550732 and STC100411 - Use rebuild kit STC500090

 

 
 
  Clutch Master Rebuild Kit "TRW"  
  Ref: STC500090G / Price $22.50  
  CV Rebuild Kit superceded from 8G8837L
 
 
  Clutch Master Rebuild Kit  
  Ref: STC500090 / Price $4.00  
  CV Rebuild Kit superceded from 8G8837L
 
 
  Cap - Fluid Reservoir  
  Ref: SJL500030 / Price $5.25  
  Application: To fit STC500100 - Superceded from STC976
 
 
  Pipe Assy - Clutch  
  Ref: NRC9595 / Price $28.95  
  Application: Defender - 4 cylinder
 
 
  Pipe Assy - Clutch  
  Ref: 577643 / Price $24.70  
  Application: Defender - V8
 
 
  Clutch Flex Hose  
  Ref: RTC4425 / Price $9.95  
  Application: Defender - Four cylinder engines.
Description: Replacement flexible clutch hose, overall length 13.0". Also used on Defender 200TDI to LA939975 - Superceded from NRC7139
 
 
  Hose - Clutch  
  Ref: NRC2211 / Price $10.45  
 

Application: Defender V8 and TD5

 
 
  Clutch Flex Hose  
  Ref: NTC9055 / Price $9.95  
  Application: Defender - 300TDI from MA939976
 
 
  Clutch Slave Cylinder Series 3 and Defender 4 cylinder - DELPHI  
  Ref:  591231G / Price: $48.95  
  Application: Series 3 four and six cylinder engines. Defender four cylinder engines in conjunction with LT77 gearbox, up to approximately 1994. Delphi PJH120 clutch slave cylinder with cast iron body. Approximate dimensions: Overall length 115mm, bore 22mm (7/8"), mounting centers 63mm.  Use hose RTC4425 or RTC5940
 
 
  Clutch Slave Cylinder Series 3 and Defender 4 cylinder 'TRW'  
  Ref:  591231T / Price: $54.95  
  Application: Defender four cylinder engines in conjunction with LT77 gearbox, up to approximately 1994. 'TRW' clutch slave cylinder with aluminium body. Approximate dimensions: Overall length 115mm, bore 22mm (7/8"), mounting centers 63mm.  Use hose RTC4425 or RTC5940
 
 
  Clutch Slave Cylinder Series 3 and Defender 4 cylinder   
  Ref:  591231 / Price: $20.30  
  Application: Defender four cylinder engines in conjunction with LT77 gearbox, up to approximately 1994. Aftermarket clutch slave cylinder with aluminium body. Approximate dimensions: Overall length 115mm, bore 22mm (7/8"), mounting centers 63mm.  Use hose RTC4425 or RTC5940
 
 
  Slave Cylinder Rebuild Kit  
  Ref: 8G8600 / Price $5.62  
  Application: Slave Cylinder 591231
 
 
  Clutch Slave Cylinder  
  Ref: TKC2786L / Price $18.95  
  Application: Defender 5 speed LT77. Superceded from AEU1128
 
 
  Clutch Slave Cylinder - Lockheed  
  Ref: FTC5071G / Price $73.95  
  Application: Stage One V8, Defender 90 and 110 V8 with LT77 5 speed, LT85 & R380 - V8. Fits all NAS manual defenders 90 & 110 - Cast Iron - Supercedes from UKC8677L - Male Fitting 7/16" X 20
 
 
  Clutch Slave Cylinder  
  Ref: FTC5071 / Price $22.95  
  Application: Stage One V8, Defender 90 and 110 V8 with LT77 5 speed, LT85 & R380 - V8. Fits all NAS manual defenders 90 & 110 - Cast Iron - Supercedes from UKC8677L - Male Fitting 7/16" X 20
 
 
  Slave Cylinder Repair Kit - Allmakes  
  Ref: BHM7063L / Price $7.95  
  Application: To rebuild slave cylinder FTC5071
 
 
  Clutch Slave Cylinder - Lockheed  
  Ref:  FTC5072G / Price: $74.95  
  Application: The following vehicle when fitted with R380 gearbox. NAS Discovery I, Defender 300TDi.
Description: Lockheed Delphi LL15965 clutch slave cylinder. Superceded from FTC3911

 
 
  Clutch Slave Cylinder - 'TRW'  
  Ref:  FTC5072T / Price: $39.95  
  Application: The following vehicle when fitted with R380 gearbox. NAS Discovery I, Defender 300TDi.
Description: 'TRW' clutch slave cylinder. Superceded from FTC3911

 
 
  Clutch Slave Cylinder  
  Ref:  FTC5072 / Price: $19.95  
  Application: The following vehicle when fitted with R380 gearbox. NAS Discovery I, Defender 300TDi.
Superceded from FTC3911

 
 
  Slave Cylinder Rebuild Kit - AP  
  Ref: STC2818G / Price $8.95  
  Application: To rebuild slave cylinder FTC5072 - 22mm
 
 
  Slave Cylinder Rebuild Kit  
  Ref: STC2818 / Price $6.50  
  Application: To rebuild slave cylinder FTC5072 - 22mm
 
 
  Clutch Slave Cylinder  
  Ref: FTC5202 / Price $14.95  
  Application: Defender TDI with R380 from 56A0669087K, Also TD5 with the R380
 
 
  Clutch Slave Cylinder 'TRW'  
  Ref: FTC5202T / Price $26.95  
  Application: Defender TDI with R380 from 56A0669087K, Also TD5 with the R380
 
 
  Slave Sealing Gasket / Spacer  
  Ref: 591988 / Price $2.45  
  Application: Defender
 
 
     
 
 
     
 
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.