Land Rover Parts for Series Defender Discovery Range Rover Freelander


 
            

 Order: 207-214-6133 or trevor@rovahfarm.com
 
 

Defender - Axles, Suspension & Steering

Page 1
   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.
  Defender- axles, suspension & steering -
Page 1
<> Page 2
 
     
  Swivel Pin Kit 'OE'  
  Ref: DA3167G / Price $489.00  
  Defender - To end of KA - Includes: OE Swivel Ball, Swivel Upper Pin, bearing, railco bush, OE seals, Gaskets, Shims, and Grease

 
 
  Swivel Pin Kit  
  Ref: DA3167 / Price $415.00  
  Defender - To end of KA - Includes: OE Swivel Ball. Swivel Upper Pin, bearing, railco bush, aftermarket seals, Gaskets, Shims, and Grease

 
 
  Swivel Pin Kit  
  Ref: DA3167P / Price $85.95  
  Defender - To end of KA - Includes: Swivel Upper Pin, bearing, railco bush, seals, Gaskets, Shims, and Grease

 
 
  Swivel Pin Kit 'OE'  
  Ref: DA3178G / Price $473.00  
  Defender - From VIN LA to WA - Includes: Swivel Housing, Swivel Pin Bearings top and bottom, Seals, Gaskets, Plate, Shims, Upper Pin and Grease - Note Swivel ball is 'OE' not the cheaper aftermarket.

 
 
  Swivel Pin Kit  
  Ref: DA3178 / Price $342.87  
  Defender - From VIN LA to WA - Includes: Swivel Housing, Swivel Pin Bearings top and bottom, Seals, Gaskets, Plate, Shims, Upper Pin and Grease - Note Swivel ball is 'OE' not the cheaper aftermarket.

 
 
  Swivel Pin Kit  
  Ref: DA3178P / Price $72.95  
  Defender - From VIN LA to WA - Includes: Swivel Pin Bearings top and bottom, Seals, Gaskets, Plate, Shims, Upper Pin and Grease

 
 
  Swivel Housing Grease - One Shot - OEM -  
  Ref: STC3435 / Price $11.95  
  Application: Discovery 1989-1998, Defender 1987> and Range Rover Classic 1992-1994

 
 
  Leather Gaiter Kit  
  Ref: RTC3826 / Price $67.95  
  Application: Defender 1983 - 2007

 
 
  Swivel Pin Shim Kit  
  Ref: ShimKit06 / Price $6.99  
  Application: Defender 1983 onwards - Kit of shims

 
 
  Swivel Bearing 'NTN'  
  Ref 606666G / Price $39.95  
 

Application: Defender 1983 >

 

 
 
  Swivel Bearing  
  Ref 606666 / Price $16.95  
 

Application: Defender 1983 >

 

 
 
  Swivel Pin - Upper - Non ABS  
  Ref: FRC3511 / Price $16.85  
  Application: Defender to KA930455

 
 
  Housing With Bush 'OEM'  
  Ref: 8510267 / Price $29.70  
  Application: Defender up to VIN KA930455 S/s from FRC2916

 
 
  Thrust Washer  
  Ref: FRC2906 / Price $1.25  
  Application: Defender from up to KA930455
 
 
  Swivel Pin - Upper - Non ABS  
  Ref: FTC2882 / Price $18.99  
  Application: Defender from LA930456 to WA159806 - Bearing top and bottom.

 
 
  Swivel Pin - Upper - NON - ABS  
  Ref: TAR100040G / $72.95  
  Application: Defender from XA159807

 
 
  Swivel Pin - Upper - ABS  
  Ref: TAR100050 / $39.95  
  Application: Defender from XA159807

   
 
 
  Bracket - Brake Pipe LH  
  Ref: FRC7201 / Price $7.95  
  Application: Defender to WA159806 - Bracket for top of swivel housing

 
 
  Bracket - Brake Pipe RH  
  Ref: FRC7202 / Price $7.95  
  Application: Defender to WA159806 - Bracket for top of swivel housing

 
 
  Bush - ABS Sensor  
  Ref: LR029522 / Price $6.75  
  Application: Defender with ABS - Superceded from FTC1374

 
 
  Swivel Pin - Lower  
  Ref: FRC2894 / Price $12.70  
  Application: Defender from 1983>

 
 
  Joint Washer - Lower Swivel Pin  
  Ref: FTC3647 / Price $0.99  
 

Application: Defender

 

 
 
  Bracket Bottom Swivel Pin  
  Ref: FRC3725 / Price $5.75  
  Application: Defender

 
 
  Bolt - Swivel Ball  
  Ref: UYG500050 / Price $1.55  
  Application: Defender Swivel Ball to Axle Case - M10 - superceded from TYG100590, FTC3456

 
 
  Swivel Ball  
  Ref: FTC5105 / Price $339.00  
  Application: Defender Axle Code 20L, 21L, 22L, and 23L - 7 hole flange - tungsten coated not chrome. Supercedes from FRC2644. Uses 1 of 8510267 and lower bearing 606666

 
 
  Swivel Ball 'OEM'  
  Ref: FTC5366 / Price $339.00  
  Application: Defender Axle Code 61L, 62L, 63L, and 64L - 7 hole flange - tungsten coated not chrome. Supercedes from FRC7065. Uses 2 of bearing 606666

 
 
  Retainer - Swivel Ball Oil Seal  
  Ref: RRY500180 / Price $7.95  
  Application: Defender (all). Note: superceded from part # 571755

 
 
  Swivel Pin Housing Seal Kit 'OE'  
  Ref: STC3321G / Price $55.95  
  Application: Defender. Corteco seals where available. Complete kit of seals and gaskets to overhaul your swivel Pin Housings - LA onwards - Note for this kit to work on trucks up to KA add FRC4206 (1) and FRC3099G (1)

 
 
  Swivel Pin Housing Seal Kit  
  Ref: STC3321 / Price $26.95  
  Application: Defender. Complete kit of seals and gaskets to overhaul your swivel Pin Housings - LA onwards - Note for this kit to work on trucks up to KA add FRC4206 (1) and FRC3099G (1)

 
 
  Plate - Seal Retainer  
  Ref: FRC4142 / Price $8.25  
  Application: Defender, Axles 20L, 21L, 22L and 23L

 
 
  Gasket - Sealing  
  Ref: FRC4206 / Price $1.75  
  Application: For use with defender axles 20L, 21L, 22L, and 23L

 
 
  Bracket - Steering Lock Stop  
  Ref: TAU100170 / Price $34.95  
  Application: Defender 1983>
 
 
  Oil Seal - Swivel Ball - 'CORTECO'  
  Ref: FTC3401G / Price $19.95  
  Application: Defender 1983>

 
 
  Oil Seal - Swivel Ball  
  Ref: FTC3401 / Price $9.50  
  Application: Defender 1983>
 
 
  Filler Plug  
  Ref 3292 / Price $1.90  
  Application: Defender - Swivel Housing Fill Plug

 
 
  Drain Plug  
  Ref: 236070 / Price $10.30  
 
 
  Application: Defender 90/110 - Drain Plug Swivel Housing - Genuine

     
  Bolt Lock - Steering  
  Ref: AFU1234 / Price $6.60  
  Application: Defender - M12 Bolt

 
 
  Front Driveshaft Oil Seal in Swivel Housing - 'CORTECO'  
  Ref: 571718G / Price $7.25  
  Application: Defender 90 and 110 1983, Axle code 20L, 21L, 22L and 23L with rear drum brakes

 
 
  Front Driveshaft Oil Seal in Swivel Housing  
  Ref: 571718 / Price $4.49  
  Application: Defender 90 and 110 1983, Axle code 20L, 21L, 22L and 23L with rear drum brakes

 
 
  Front Driveshaft Oil Seal in Swivel Housing  
  Ref: FTC3276G / Price $8.60  
  Application: Defender Axle 61L and 61S, Axle 63L, 64L (front axle solid disk - 4 wheel disk brakes) - Corteco

 
 
  Front Driveshaft Oil Seal in Swivel Housing  
  Ref: FTC3276 / Price $3.99  
  Application: Defender Axle 61L and 61S, Axle 63L, 64L (front axle solid disk - 4 wheel disc brakes) - Corteco

 
 
  Joint Washer  
  Ref: FTC3646 / Price $0.99  
 

Application: Defender 1983> - Allmakes
Description: Gasket between swivel ball and axle. S/s from FRC2349

 
 
  Bush - Stub Axle Front  
  Ref: FRC4319 / Price $17.95  
  Application: Defender 1983> to KA930455 - Allmakes

 
 
  Seal - Stub Axle Front - 'CORTECO'  
  Ref: FRC3099G / Price $10.59  
  Application: Early Defender 1983 to KA930455 - Corteco

 
 
  Seal - Stub Axle Front  
  Ref: FRC3099 / Price $3.95  
  Application: Early Defender 1983 to KA930455

 
 
  Oil Seal - Stub Axle Outer - Front  
  Ref: FTC840 / Price $4.25  
  Application: Defender from (V) LA930456 to (A)21L56452C / (A)20L7038C

 
 
  Oil Seal - Stub Axle Outer - Front  
  Ref: FTC3145G / Price $5.99  
  Application: Defender from (A)20L77037C / (A)21L56453C to VA104814 'CORTECO'

 
 
  Oil Seal - Stub Axle Outer - Front  
  Ref: FTC3145 / Price $2.99  
  Application: Defender from (A)20L77037C / (A)21L56453C to VA104814

 
 
  Oil Seal - Stub Axle Front & Rear  
  Ref: FTC5268G / Price $6.40  
  Application: Defender front from VA104815 / rear from LA930456, Highest quality oil seal from Corteco.

 
 
  Oil Seal - Stub Axle Front & Rear  
  Ref: FTC5268 / Price $3.15  
  Application: Defender front from VA104815 / rear from LA930456, Highest quality aftermarket oil seal from Allmakes.

 
 
  Stub Axle - Front 'OE'  
  Ref: FRC4320G / Price $109.95  
  Application: Defender to KA930455 - Includes Bush and 'Corteco' Oil Seal

 
 
  Stub Axle - Front  
  Ref: FRC4320 / Price $59.95  
  Application: Defender to KA930455 - Includes Bush and Oil Seal

   
 
 
  Stub Axle Kit Front from LA  
  Ref: DA3191 / Price $89.00  
  Application: Defender from LA

 
 
  Stub Axle - Front  
  Ref: FTC3154 / Price $54.95  
  Application: Defender from LA930456 - supercedes FTC3183

 
 
  Stub Axle - Rear - D90  
  Ref: FRC3132 / Price $58.95  
  Application: Defender 90 to (A) 22S 08283B - No Seal Used - Use gasket FTC3649 and bolts FRC7257

 
 
  Stub Axle  
  Ref: FRC8540 / Price $50.95  
  Application: Defender 90" models from (A)225 08284B and 110" models. Does not have a seal.

 
 
 
  Stub Axle  
  Ref: FTC3188 / Price $59.95  
  Application: Defender from LA930456

 
 
  Stub Axle - Rear - Salisbury  
  Ref: FTC1740 / Price $64.95  
  Application: Defender with Salisbury Rear Axle - From LA930456 Axle 38S, 39S except 90 - Oil Seal Included

 
 
  Mudshield - Front Axle  
  Ref: FRC2310 / Price $6.95  
  Application: Defender 1983 onwards - no ABS

 
 
  Gasket - Stub Axle - Front Axle  
  Ref: FTC3648 / Price $0.99  
  Application: Gasket - Stub Axle, Defender 1983>, Allmakes 4X4 brand - S/s from FRC3205

 
 
  Gasket - Stub Axle - Rear Axle  
  Ref: FTC3649 / Price $0.99  
  Application: Defender to KA930455 ID 3" OD 5 1/8" - S/s from FRC3136

 
 
  Gasket - Stub Axle Rear ABS  
  Ref: FTC3650 / Price $0.99  
  Application: Gasket - Stub Axle, Defender from KA931243

 
 
  Bearing Stub Axle - Front 'OE'  
  Ref: FTC861G / Price $16.95  
  Application: Discovery I 1988-1999, Defender 1987>, Range Rover Classic 1986-1994.

 
 
  Bearing Stub Axle - Front  
  Ref: FTC861 / Price $10.30  
  Application: Discovery I 1988-1999, Defender 1987>, Range Rover Classic 1986-1994.

 
 
  Thrust Washer - Stub Axle  
  Ref: FTC56 / Price $8.49  
 

Application: Defender 1987>

 
 
  Front RH 23 Spline Drive Shaft  
  Ref: AEU2520 / Price $59.95  
  Application: Defender 23 Spline Front Right Hand - use with CV joint AEU2522 and circlip RTC4820 and Spacer FTC254

 
 
  Front LH 23 Spline Drive Shaft  
  Ref: AEU2521 / Price $79.95  
  Application: Defender 23 Spline Front Left Hand - use with CV joint AEU2522 and circlip RTC4820 and spacer FTC254

   
 
 
  Spacer CV Joint OE  
  Ref: FTC254 / Price $8.46  
  Application: Defender - Use with AEU2520 or AEU2521 or CV AEU2522

 
 
  Circlip  
  Ref: RTC4820 / Price $0.86  
  Application: Defender - Use with AEU2520 or AEU2521 or CVAEU2522

 
 
  CV Joint - Allmakes  
  Ref: AEU2522 / Price $59.00  
  Application: Defender to KA930455 includes grease and clip - non ABS - 23 spline - Use with shafts AEU2520 or AEU2521

 
 
  Drive Shaft Complete LH  
  Ref: FRC3891 / Price $134.95  
  Application: Defender to KA930455 includes grease - non ABS - Consists of AEU2522 and AEU2521

 
 
  Drive Shaft Complete RH  
  Ref: FRC3890 / Price $129.95  
  Application: Defender to KA930455 includes grease - non ABS - Consists of AEU2522 and AEU2520

 
 
  Front RH 32 Spline Drive Shaft  
  Ref: RTC6754 / Price $58.95  
  Application: Defender 32 Spline Front Right Hand - use with CV joint RTC6862 - Length 17 5/8" - Use spacer TYF000010 and circlip TDL100240

   
 
 
  Front LH 32 Spline Drive Shaft  
  Ref: RTC6755 / Price $68.95  
  Application: Defender 32 Spline Front Left Hand - use with CV joint RTC6862 - Length 32 7/8" - Use spacer TYF000010 and circlip TDL100240


   
 
 
  Spacer CV Joint  
  Ref: TYF000010 / Price $4.95  
  Application: Defender from LA930456 to XA159807, S/s from RTC5841

 
 
  Circlip  
  Ref: TDL100240 / Price $3.45  
  Application: Defender - Front of Axle Shaft to CV Joint. Superceded from STC579

 
 
  CV Joint  
 

Ref: RTC6862 / Price $69.00

 
  Application: Defender - Use with shafts RTC6754 and RTC6755 - Circlip TDL100240 - Outer 24 spline, Inner 32 spline - Comes with grease and circlip. Unit is 9 5/16" in length

 
 
  Front RH 24 Spline Drive Shaft Complete - RH  
  Ref: TDB500280 / Price $104.95  
  Application: Defender 24 Spline Front Right Hand - Note: 10M to 17M - Superceded from TDB000180 - Consists of TDJ000010 and TDC000020

 
 
  Front LH 24 Spline Drive Shaft Complete - RH  
  Ref: TDB500290 / Price $118.95  
  Application: Defender 24 Spline Front Right Hand - Note: 10M to 17M - Superceded from TDB000190 - Consists of TDJ000010 and TDC000030

 
 
  Front RH 24 Spline Drive Shaft - RH  
  Ref: TDC000020 / Price $54.95  
  Application: Defender 24 Spline Front Right Hand - use with CV joint TDJ000010 - Note: 10M to 17M - Superceded from STC3049

 
 
  Front RH 24 Spline Drive Shaft - LH  
 

Ref: TDC000030 / Price $66.95

 
  Application: Defender 24 Spline Front Left Hand - use with CV joint TDJ000010 - Note 10M to 17M - length 32 7/8" superceded from STC3050

   
     
  CV Joint "ABS" 24 Spline  
  Ref: TDJ000010 / Price $79.00  
  Application: Defender from LA 930456 Includes CV grease and clip Superceded from STC3051 - 24 spline - Fits NAS 90

 
 
  Hub - Driving Member 24 Spline 'OE'  
  Ref: FRC5806G / Price $78.95  
  Application: Defender up to VIN KA930455

 
 
  Hub - Driving Member 24 Spline  
  Ref: FRC5806 / Price $19.95  
  Application: Defender up to VIN KA930455

 
 
  Hub - Driving Member 24 Spline  
  Ref: FRC5806HD / Price $83.95  
  Application: Defender up to VIN KA930455

 
 
  Hub - Driving Member 24 Spline (PAIR)  
  Ref: DA1149 / Price $199.00  
  Application: Defender up to VIN KA930455 - includes Flange Bolts and Flange Gaskets

 
 
  Ref: RUC105200 / Price $14.95  
  Application: Defender from VIN LA930456 - S/s from FTC859

 
 
  Hub - Driving Member 24 Spline  
  Ref: RUC105200G / Price $43.95  
  Application: Defender from VIN LA930456 - S/s from FTC859

 
 
  Hub - Driving Member 24 Spline - Heavy Duty  
  Ref: RUC105200HD / Price $94.95  
  Application: Defender from VIN LA930456

 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6782 / Price $7.30  
  Application: Defender - 0.45mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6783 / Price $7.30  
  Application: Defender - 0.60mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6784 / Price $7.30  
  Application: Defender - 0.75mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6785 / Price $7.30  
  Application: Defender - 0.90mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6786 / Price $7.30  
  Application: Defender - 1.05mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6787 / Price $7.30  
  Application: Defender - 1.20mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6788 / Price $7.30  
  Application: Defender - 1.35mm


 
 
  Shim - Front Axle Half Shaft  
  Ref: FRC6789 / Price $7.30  
  Application: Defender - 1.50mm


 
 
  Driving Member Bolt  
  Ref: RYG101010L / Price $0.99  
  Application: Defender - superceded from AFU1181

 
 
  Axle Shaft Circlip  
  Ref: 549473 / Price $0.75  
  Application: Defender to 2007 inclusive

 
 
  Rear Axle Shaft 24 spline - RH  
  Ref: FRC2454 / Price $50.95  
  Application: Defender 110 and 130 to KA930455
67cm

 
 
  Rear Axle Shaft 24 spline - LH  
  Ref: FRC2455 / Price $59.95  
  Application: Defender 110 and 130 to KA930455
101cm

 
 
  Rear Axle Shaft 24 spline - RH  
  Ref: FTC1724 / Price $72.95  
  Application: Defender 110 and 130 from LA930456 - 25 3/16"

 
 
  Rear Axle Shaft 24 spline - LH  
  Ref: FTC1725 / Price $83.95  
  Application: Defender 110 and 130 from LA930456

 
 
  Rear Axle Shaft RH D90  
  Ref: FRC8094 / Price $49.95  
  Application: D90 to KA930455 - 24 spline both ends - 27 7/16" length

 
 
  Rear Axle Shaft LH D90  
  Ref: FRC8095 / Price $52.95  
  Application: D90 to KA930455 - 24 spline both ends - 38" length

 
 
  Rear Axle Shaft RH 24 Spline  
  Ref: FTC3270 / Price $107.95  
  Application: Defender 90 from LA930456 - RH - 24 Spline Shaft -Short Side - Fits NAS 90

 
 
  Rear Axle Shaft LH 24 Spline  
  Ref: FTC3271 / Price $129.95  
  Application: Defender 90 from LA930456 - LH - 24 Spline Shaft - Long Side - Fits NAS 90

 
 
  Hub - Front  
  Ref: FRC6139 / Price $184.95  
  Application: Defender 90 and 110 to KA930455

 
 
  Hub - Front and Rear  
  Ref: RUB500240 / Price $119.95  
  Application: Defender 90 and 110 from LA930456 - Superceded from FTC942

 
 
  Hub - Rear  
  Ref: FRC8555 / Price $125.95  
  Application: Defender 90 from (A)22S08264B up to KA930455.
Def 110" to KA930455

 
 
  Hub Bearing Spacer 'Blue' 15.2mm  
  Ref: TOF100030 / Price $4.95  
  Application: Defender Front and Rear Axle from LA930456

 
 
  Hub Bearing Spacer 'Green' 15.1mm  
  Ref: TOF100040 / Price $3.95  
  Application: Defender Front and Rear Axle from LA930456

 
 
  Hub Bearing Spacer 'Red' 15.3mm  
  Ref: TOF100020 / Price $4.95  
  Application: Defender Front and Rear Axle from LA930456

 
 
  Hub Oil Seal Inner - Corteco  
  Ref: RTC3511G / Price $11.75  
 

Application: Defender 1983> to KA930455
Up to Axle No. 20L13358B-RHS, 21L10631B-LHS
Highest Quality Oil Seal by 'Corteco'


 
 
  Hub Oil Seal Inner - Allmakes  
  Ref: RTC3511 / Price $3.49  
  Application: Defender 1983> to KA930455
Up to Axle No. 20L13358B-RHS, 21L10631B-LHS - Allmakes

 
 
  Hub Oil Seal Inner - Allmakes OE  
  Ref: FRC8221G / Price $5.45  
 

Application: Defender 1983 to 1986
From Axle No. 20L13359B-RHS, 21L10632B-LHS - Some remaining, once NLA these supercede to FTC4785

 
 
  Hub Outer Seal - 'Corteco'  
  Ref: FRC8222G / Price  
  Application: Defender up to KA930455
 
 
  Hub Outer Seal  
  Ref: FRC8222 / Price $2.99  
  Application: Defender up to KA930455

 
 
  Hub Oil Seal Inner 'CORTECO'  
  Ref: FTC4785G / Price $5.95  
 

Application: Defender 1986 >
From Axle No. 20L13359B-RHS, 21L10632B-LHS
Highest Quality Oil Seal by 'Corteco' S/s from FTC2783, FRC8221

 
 
  Hub Oil Seal Inner  
  Ref: FTC4785 / Price $3.55  
 

Application: Defender 1986 >
From Axle No. 20L13359B-RHS, 21L10632B-LHS
Highest Quality Oil Seal from Allmakes. S/s from FTC2783, FRC8221

 
 
  Hub Oil Seal/Bearing Kit - Corteco/Timken  
  Ref: WheelBearingKitG / Price $55.95  
  Application: Defender Featuring Corteco seal and Two Timken bearings. Kit for one hub. Consists of FTC4785G (1), RTC3429G (2), FTC3179 (1), and 571752 (1)

 
 
  Hub Oil Seal/Bearing Kit  
  Ref: WheelBearingKit / Price $39.95  
  Application: Defender - Kit for one hub
Consists of FTC4785 (1), STC4382 (2), FTC3179 (1), and 571752 (1)

 
 
  Hub Bearing and Oil Seal Kit - Timken/Corteco  
  Ref: RTC3537G / Price $55.95  
  Application: Early Defender up to KA930455
Description: All parts for the rebuild of one hub assembly using Timken bearings and Corteco oil seal.

 
 
  Hub Bearing and Oil Seal Kit  
  Ref: RTC3537 / Price $39.95  
  Application: Early Defender up to KA930455
Description: All parts for the rebuild of one hub assembly.

 
 
  Bearing - Hub Front/Rear  
  Ref: RTC3429G / Price $20.95  
  Application: Defender 1983>, . Highest quality bearing by 'Timken'

 
 
  Bearing - Hub Front/Rear - NLA  
  Ref: RTC3429 / Price  
 

Application: Defender 1987>, Discovery I, Range Rover Classic MY 1986-1994. High Quality aftermarket bearing by Allmakes

The STC4382 (the later number) can be used in place of RTC3429 without an issue.
However RTC3429 (the old number) can not be used in place of STC4382 as RTC3429 is 1mm thicker.


 
 
  Bearing - Hub Front/Rear  
  Ref: STC4382 / Price $11.95  
  Application: Defender 1987>, Discovery I, Range Rover Classic MY 1986-1994.

 
 
  Key Washer  
  Ref: 217352 Price $1.85  
  Application: Early Defender to KA930455

 
 
  Lock Washer  
  Ref: 217353 / Price $0.89  
  Application: Early Defender to KA930455

 
 
  Seal - Oil  
  Ref: FRC8227 / Price $5.95  
 

Application: Defender 90/110 - Non ABS


 
 
  Washer Stub Axle  
  Ref: FTC3185 / Price $4.50  
  Application: Defender to TA996892

 
 
  Washer Stub Axle  
  Ref: FTC5241 / Price $5.85  
  Application: Defender from TA996893

 
 
  Lock Washer  
  Ref: FTC3179 / Price $0.75  
  Application: Defender from LA930456 to WA159806

 
 
  Hub Lock Nut  
  Ref: FRC8700G / Price $3.99  
 

Application: Defender 1983 to WA159806
Description: Hub nut

 
 
  Hub Lock Nut  
  Ref: FRC8700 / Price $2.50  
 

Application: Defender 1983 to WA159806

 
 
  Hub Lock Stake Nut  
  Ref: RFD100000 / Price $1.99  
 

Application: Defender from XA159807 and for axle codes 10M to 17M

 
 
  Hub Lock Stake Nut  
  Ref: RFD100000G / Price $4.95  
 

Application: Defender from XA159807 and for axle codes 10M to 17M

 
 
  Hub Nut Spanner  
  Ref: 606435 / Price $11.95  
  Application: Defender (all) - UK manufactured

 
 
  Gasket  
  Ref: FRC3988 / Price $1.14  
  Application: Defender Front Hubs to KA930455

 
 
  Gasket  
  Ref: 571752 / Price $0.49  
  Application: Gasket - Axle Shaft Drive Member, Defender from LA930456, Discovery 1989 - 1998, Range Rover Classic

 
 
  Driving Member Bolt M10 X 45  
  Ref: BX110095M / Price $0.80  
  Application: Defender - Front and Rear Hubs from LA930456

 
 
  Alloy Wheel Spacers 30mm  
  Ref: TF301B / TF301 Price $279.00  
  Application: Defender, Discovery I and RRC

Black

Silver

 
 
  Wheel Hub Stud - 40mm  
  Ref: RUF500010 / Price $1.70  
  Application: Defender - 40mm

 
 
  Wheel Hub Stud - 45mm  
  Ref: FRC6137 / Price $2.80  
  Application: Defender to vin KA930455 - 45mm

 
 
  Wheel Hub Stud - 60mm 'OE'  
  Ref: FRC7577 / Price $13.95  
  Application: Defender

 
 
  Lug Nut OE  
  Ref: RRD500010G / Price $2.50  
  Application: Series III, Defender, Disco I (steel wheels)

 
 
  Lug Nut - Aftermarket Allmakes  
  Ref: RRD500010 / Price $1.20  
  Application: Series III, Defender, Disco I (steel wheels)

 
 
  Wheel Nut - Stainless 'OEM'  
  Ref: RRD500560G / Price $11.20  
  Application: Defender Alloys - Stainless - Superceded from ANR2763MMM

 
 
  Wheel Nut - Black Satin Cap  
  Ref: RRD500560B / Price $7.25  
  Application: Defender Alloys

 
 
  Wheel Nut - Stainless  
  Ref: RRD500560 / Price $5.90  
  Application: Defender Alloys - Stainless - Superceded from ANR2763MMM

 
 
  Locking Wheel Nut Set for Alloy Wheels  
  Ref: STC8843AA / Price $127.95  
  Application: Disco I and II, For Land Rover wheels only

 
 
  Wheel Wrench  
  Ref: LR011870 / $7.95  
  Application: Series (all) 1 1/16", Defender, Disco, Range Rover Classic, p38.
13" long. Fits 576103 and RRD500010 - S/s from NTC7829


 
 
  Wheel Wrench - HD  
  Ref: LR011870A / $13.95  
  Application: Series (all) 1 1/16", Defender, Disco, Range Rover Classic, p38.
15.5" long. Fits 576103 and RRD500010 - S/s from NTC7829A. Set further back from the rim and angled unlike other models to eliminate skinned knuckles. Believe me I learned the hard way!


 
 
  Driveshaft Cap  
  Ref: FRC4377 / Price $1.59  
  Application: Defender to KA930455 - Early deeper cap

 
 
  Driveshaft Cap with Land Rover Logo - Genuine  
  Ref: FTC5414GEN / Price $13.90  
  Application: Defender

 
 
  Driveshaft Cap with Land Rover Logo - OEM  
  Ref: FTC5414G / Price $9.49  
  Application: Defender

 
 
  Driveshaft Cap - Aftermarket  
  Ref: FTC5414 / Price $1.50  
  Application: Defender

 
 
 
     
     
  Defender - axles, suspension & steering -
Page 1 <> Page 2
 
     
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles, Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Nuts, Bolts and Screw etc.