Order: 207-214-6133 or trevor@rovahfarm.com
 
 

Series Trucks - Axles, Suspension and Steering
Page 1
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts
  Series axles, suspension & steering -
Page 1 <> Page 2 <> Page 3 <> Page 4 <> Page 5
     
     
  Swivel Housing Kit - BritPart  
  Ref: DA3181 / Price $415.00  
  Complete Kit: Includes "OE" Swivel Ball, Swivel Ball Seal and Retainer, Swivel Pin, Shims and O Ring, Railko Bush 'OE', Bearing, Gaskets, Locking Tabs, Grease. Note: Swivel Ball part # 539741 is 'OE' not the cheaper aftermarket version
 
 
  Swivel Housing Kit - BritPart  
  Ref: DA3181P / Price $94.95  
  Complete Kit: Includes: Swivel Ball Seal and Retainer, Swivel Pin, Shims and O Ring, Railko Bush 'OE', Bearing, Gaskets, Locking Tabs, Grease.

 
 
  Oil Seal - Front Axle Case - 'Corteco'  
  Ref: 217400G / Price $9.70  
  Application: series (all) front axle case
 
 
  Oil Seal - Front Axle Case  
  Ref: 217400 / Price $3.75  
  Application: series (all) front axle case
 
 
  Bolt 1/4 inch BSF  
  Ref: 250693 / Price $1.05  
  Application: Series (all) - Bolt for retainer plate to swivel housing
     
  Retainer Ring  
  Ref: 235968 / Price $8.75  
  Application: series (all)
 
 
  Swivel Seal  
  Ref: RTC3528 / Price $5.99  
  Application: Series (all) 'BES' Seal - UK made
 
 
  Lock Stop Plate  
  Ref: 508175 / Price $10.95  
  Application: Series (all) - Use bolt #576521 or #576522 for 109 1 ton
 
 
  Jack Locator Stop  
  Ref: 90519206 / Price $10.45  
  Application: Series III
 
 
  Drain Plug  
  Ref: 236070 / Price $11.95  
  Application: Series (all) - Drain Plug Swivel Housing
 
 
  Sealing Washer  
  Ref: 230511 / Price $2.52  
  Application: Series - sealing washer for drain plug
 
 
  Halfshaft Collar - Front  
  Ref: 90217398 / Price $26.95  
  Application: Series Axles - Front
 
 
  Bearing - Front Half Shaft - 'OE'  
  Ref: 244150G / Price $113.95  
  Application: Series 2 and 3
Description: Outer diameter 3" inner 1 3/8" - COE - Spain.
 
 
  Bearing - Front Half Shaft  
  Ref: 244150 / Price $56.95  
  Application: Series 2 and 3
Description: Outer diameter 3" inner 1 3/8"
 
 
  Distance Piece Front Half Shaft  
  Ref: 244151 / Price $5.70  
  Application: Series (all) to 1984 - Supplier - Santana
 
 
  Gasket - Joint Washer for Housing  
  Ref: 232413 / Price $1.10  
  Application: Series (all) incl 109 V8, Gasket between axle and swivel ball - S/s from GFG107
 
 
  Swivel Ball Leather Gaiter Kit  
  Ref: 276954 / Price $45.95  
  Application: Series II - III - Complete Axle Kit. Protect your swivel balls.
 
 
  Swivel Ball - 'OE'  
  Ref: 539741G / Price $340.00  
  Application: Series (all) - This is an 'OE' swivel ball. There is a cheaper aftermarket version available, but why risk it.
 
 
  Bolt 3/8 BSF X 1.25 Long  
  Ref: 90576510 / Price $4.53  
  Application: Swivel Ball Flange to Axle - 88" and 109" to Sept 1980
 
 
  Nyloc Nut 3/8" BSF  
  Ref: 251322 / Price $0.55  
  Application: Swivel Ball Flange to Axle - 88" and 109" to Sept 1980
 
 
  Bush For Driving Shaft - NLA  
  Ref: 217354 / Price $24.95  
  Application: Early Series II
 
 
  Stub Axle Shaft  
  Ref: 242520 / Price $148.00  
  Application: 88" up to June 1980 - BritPart
 
 
  Stub Axle Shaft  
  Ref: 608023 / Price $148.00  
  Application: 109" up to June 1980 - Britpart
 
 
  Front Half Shaft Universal Joint  
  Ref: RTC3690G / Price $36.95  
  Application: Series (all) "Hardy Spicer, GKN"
 
 
  Conversion Kit  
  Ref: 532268 / Price $149.95  
 

Conversion kit that coverts the older spring loaded king pin system found on the series I, II and early IIa to the more modern Railko System. Kit contains parts to convert both Housings

 
   
 
 
  Swivel Pin  
  Ref: 532941 / Price $13.50  
  Application: Series - Replacement Pin for Kit 532268 - Superceded from 528443
 
 
  Swivel Bearing - Timken  
  Ref: 217268G / Price $45.95  
  Application: Bearing for bottom of swivel housing, fits: series (all) - "Timken"
 
 
  Swivel Bearing  
  Ref: 217268 / Price $13.95  
  Application: Bearing for bottom of swivel housing, fits: series (all) - Allmakes or Britpart
 
 
  Swivel Pin  
  Ref: 576583 / Price $15.75  
  Application: Series (all)
 
 
  Bolt - Swivel Pin  
  Ref: 237357 / Price $1.84  
  Application: Series - Later Style
 
 
  Railko Bush 'OEM'  
  Ref: 539742G / Price $24.95  
  Application: Series (all) - Britpart
 
 
  Railko Bush  
  Ref: 539742 / Price $13.95  
  Application: Series (all) - Allmakes 4X4
 
 
  Thrust Washer for Railko Bush  
  Ref: 8510288 / Price $2.49  
  Application: Series (all) Swivel Housing with Railko Bush S/s of 528702
 
 
  Stud - Swivel Housing  
  Ref: 531043 / Price $2.95  
  Application: Series - Special Stud - Use nut 594104 - Later Style
 
 
  O Ring - Swivel Housing  
  Ref: 531433 / Price $0.80  
  Application: Series (all)
 
 
  Locker  
  Ref: 531001 / Price $2.50  
  Application: Series (all) 4 required each swivel
 
 
  Shim Kit  
  Ref: ShimKit04 / Price $9.95  
  Application: Series - Shim Kit
 
 
  Gasket - Swivel Pin Housing  
  Ref: 277289 / Price $1.20  
 

Gasket between swivel pin housing and stub axle
Application: Series II and IIa, 109 up to Sept 1980 also 88 from July to Sept 1980. S/s from GFG108
 
 
   
     
  Series axles, suspension & steering -
Page 1 <> Page 2 <> Page 3 <> Page 4 <> Page 5
   
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts