Order: Cell: 207-214-6133 or trevor@rovahfarm.com
 

 Series Trucks - Flywheel & Clutch
Page 2
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts
 
 
     
  Series - Flywheel & Clutch - Page 1 <> Page 2
  Seal PedalBox - Currently unnavailable  
  Ref: MUC7505 / Price $6.25  
  Application: Series (all)
 
 
  Pedal Box Inspection Plate  
  Ref: 272713 / Price $23.95  
  Application: Series
 
 
  Pedal Box Inspection Plate Gasket  
  Ref: 272819 / Price $2.49  
  Application: Series
 
 
  Stud - Flywheel Housing  
  Ref: 247145 / Price $0.99  
  Application: Series 4 Cylinder - use nut NH606041L
 
 
  Plug  
  Ref: AFU2627 / Price $5.95  
  Application: Plug for access holes in sides of brake pedal box with servo - 1 5/8" Diameter Hole
 
 
  Clutch Pipe - SII & IIa - RHD  
  Ref: ACP400 / Price $24.95  
  Application: Clutch Pipe from master to slave RHD 3/16OD
Automec copper/nickel alloy "Kunifer" GIves you peace of mind will never rust.
 
 
  Clutch Pipe - SII & IIa - LHD  
  Ref: ACP402 / Price $29.95  
  Application: Clutch Pipe from master to slave LHD 3/16OD - 49" long
Automec copper/nickel alloy "Kunifer" GIves you peace of mind will never rust.
 
 
  Clutch Pipe - SIII  
  Ref: LD0053 / Price $36.95  
  Application:
Series III LHD - Clutch Master Cylinder to flex hose 1/4" - 53" Long
Automec copper/nickel alloy "Kunifer" GIves you peace of mind will never rust.
 
 
  Clutch Pipe - SIII  
  Ref: ACP405 / Price $24.95  
  Application:
Series III RHD - Clutch Master Cylinder to flex hose 1/4"
Also
Series III LHD flex hose to slave cylinder - 29"

Automec copper/nickel alloy "Kunifer" GIves you peace of mind will never rust.
 
 
  Clutch Pipe - SIII  
  Ref: ACP406 / Price $19.95  
  Application: Series III RHD - From the flex hose to the slave cylinder 1/4"
Automec copper/nickel alloy "Kunifer" GIves you peace of mind will never rust.
 
 
  Clutch Shaft and Lever - Genuine  
  Ref: 537603 / Price $59.95  
  Application: Series 1963 - 1971
 
 
  Trunnion for Clutch/Brake Pedal  
  Ref: 568883 / Price $22.15  
  Application: Series (all)
 
 
  Clutch Pedal Return Spring  
  Ref: 569701 / Price $2.45  
  Application: Series (all)
 
 
  Anchor Plate  
  Ref: 240708 / Price $10.49  
  Application: To anchor clutch return spring
 
 
  Taper Plug (wading plug)  
  Ref: 3290 / Price $4.95  
  Application: Series (all)
 
 
  Spherical Bearing - Slave Cylinder Mounting Brkt  
  Ref: 90217984 / Price $21.50  
  Application: Series II and IIa. S/s from 217984
 
 
  Felt Ring for Spherical Bearing  
  Ref: 217985 / Price $6.95  
  Application: Series II and IIa
 
 
  Housing for Spherical Bearing  
  Ref: 217983 / Price $27.41  
  Application: Series I, II and IIa - no synchro box
 
 
  Clutch Release Lever Arm Kit  
  Ref: 576137KIT / Price $109.95  
 

Application: Series III, 101FC & 109 V8

 
 
  Clutch Release Lever Arm  
  Ref: 576137 / Price $78.95  
 

Application: Series III, 101FC & 109 V8

 
 
  Nylon Insert - Clutch Release Lever Arm  
  Ref: 571161 / Price $1.49  
  Application: Series III, 101FC & 109 V8
 
 
  Staple  
 

Ref: 576203 / Price $0.89

  
  Application: Clutch mechanism throw out bearing
 
 
  Clip - Clutch Release  
  Ref: 576723 / Price $0.90  
  Application: Series III
 
 
  Clip  
  Ref: 571163 / Price $2.25  
  Application: Series III
 
 
  Clutch Cover 9" 'AP' - NLA  
  Ref: 591705G / Price  
  Application: Series I & II and IIa where 9" clutch is used.
 
 
  Clutch Cover 9" 'Britpart'  
  Ref: 591705 / Price $178.40  
  Application: Series I & II and IIa where 9" clutch is used.
 
 
  Clutch Pressure Plate 9 1/2" 'AP'  
  Ref: 571228G / Price $309.00  
  Application: Series II and IIa, optional 9.5" clutch. For use with part syncromesh gearbox not for use with full syncromesh gearbox.
 
 
  Clutch Pressure Plate 9 1/2" 'Britpart'  
  Ref: 571228 / Price $182.95  
  Application: Series II and IIa, optional 9.5" clutch. For use with part syncromesh gearbox not for use with full syncromesh gearbox.
 
 
  Clutch Pressure Plate 'AP'  
  Ref: 576557G / Price $139.95  
  Application: Late Series IIa and Series III for 9 I/2" diameter clutch plate. For use with full synchromesh gearbox
 
 
  Clutch Pressure Plate 'Britpart'  
  Ref: 576557 / Price $115.95  
  Application: Late Series IIa and Series III for 9 I/2" diameter clutch plate. For use with full synchromesh gearbox
 
 
  Clutch Pressure Plate  
  Ref: 576476G / Price $189.95  
  Application: Series III 109 V8 3.5i, Defender 1987>, Discovery I 1994 manual.
 
 
  Clutch Plate 9"  
  Ref: 591704G / Price $154.95  
  Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Nine inch diameter clutch plate by Quinten Hazel.This has a ten spline centre.
Approximate dimensions: overall diameter 230mm.
 
 
  Clutch Plate 9"  
  Ref: 591704 / Price $69.95  
  Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Nine inch diameter clutch plate from Britpart.This has a ten spline centre.
Approximate dimensions: overall diameter 230mm.
 
 
  Clutch Plate 9.5"  
  Ref: 8510290G / Price $99.95  
 

Application: Series 2A (optional use) and Series 3.
Description: 9.5" diameter clutch plate (friction disc) by AP. 10 spline centre.
Approximate dimensions: overall diameter 240mm. S/s of FRC2297

 
 
 
  Clutch Plate 9.5"  
  Ref: 8510290 / Price $44.95  
 

Application: Series 2A (optional use) and Series 3.
Description: 9.5" diameter clutch plate (friction disc) by AP. 10 spline centre.
Approximate dimensions: overall diameter 240mm. S/s of FRC2297

 
 
 
  Clutch Plate 3.5V8i  
  Ref: FRC9773G / Price $105.95  
  Application: Series 109 3.5 V8i as well as early Defender and Range Rover Classic, diameter 10.5" by Quinton Hazell (QP)
 
 
  Clutch Release Bearing Series 2A - 'FAG' or 'NTN'  
  Ref: STC1130G / Price $19.83
  
  Application: Series 2 and 2A part syncromesh gearbox with the unsealed clutch release (throw out) mechanism. This is the usual setup on the Series 2 and 2A. Also used in various gearboxes.
Description: Single row ball bearing by FAG, type 6207.C3.
Approximate dimensions: overall diameter 72mm (2.83"), inside diameter 35mm (1.38"), thickness 12mm (0.47").
 
 
  Clutch Release Bearing Series 2A - Allmakes  
  Ref: STC1130 / Price $13.95
  
  Application: Series 2 and 2A part syncromesh gearbox with the unsealed clutch release (throw out) mechanism. This is the usual setup on the Series 2 and 2A. Also used in various gearboxes.
 
 
  Clutch Release Bearing - S3 type - NLA  
  Ref: FRC9568 / $27.60  
  Application: Series 3 four and six cylinder engines.
Description: Original design but non genuine release bearing. No Longer Available - use FTC5200
 
 
  Clutch Release Bearing  
 

Ref: FTC5200G / Price $31.95

  
  Application: Series 109 Stage One, Defender 1987> 2.25L Petrol, 200 & 300 TDI, Twin Carb V8, for LT 77 / 85 and R380, V8
Manufactured by NSK. For series 4 and 6 cylinder engines use FRC9568
 
 
  Clutch Release Bearing  
 

Ref: FTC5200 / Price $21.95

  
  Application: Series 109 Stage One, Defender 1987> 2.25L Petrol, 200 & 300 TDI, Twin Carb V8, for LT 77 / 85 and R380, V8
Manufactured by Allmakes. For series 4 and 6 cylinder engines use FRC9568
 
 
  Clutch Alignment Tool  
  Ref: TLS3363 / Price $9.99  
  Application: Series II and IIa and III. Plates 591704 and 8510290
 
 
  Locating Dowel - Flywheel  
  Ref: 502116 / Price $0.85  
  Application: Series
 
 
  Bolt - Flywheel to Crankshaft  
  Ref: 247135 / Price $12.30  
  Application: Series 3 Bearing Crankshaft
 
 
  Bolt - Flywheel to Crankshaft  
  Ref: ERR4574 / Price $6.95  
  Application: Series - 5 Bearing Crankshaft - Superceded from ERC6551
 
 
  Locker Flywheel  
  Ref: 526161 / Price $1.25  
  Application: Series II & IIA - 4 required
 
 
  Timing Cover Gasket  
  Ref: 50216 / Price $1.90  
  Application: All Series 4 Cylinder Engine - Flywheel Housing Timing Cover Gasket
 
 
  Ring Gear  
  Ref: 506799 / Price $85.65  
  Application: Series 2.25 and 2.6 petrol
 
 
  Ring Gear 'OE'  
  Ref: 568431 / Price $99.00  
  Application: Series 2.25 diesel
 
 
  Bush - Flywheel  
  Ref: LFB500050 / Price $5.80  
  Application: Series (all) Supercedes from 8566L
 
 
  Bush - Flywheel and Crankshaft  
  Ref: 549911 / Price $3.95  
  Application: Series Stage One V8
 
 
     
 
 
     
  Series - Flywheel & Clutch - Page 1 <> Page 2
     
 

Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts