Order: 207-214-6133 or trevor@rovahfarm.com
 

Series Trucks - Gearbox & Propshaft
Page 2
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts
     
  Series - Gearbox & Propshaft - Page 1 <> Page 2 <> Page 3
     
 
 
     
  Front Propshaft 88" & 109"  
  Ref: STC1898 / Price $159.95  
 

Application: Series 88 & 109 4 cylinder
Grease nipples on both U-joints and one for end of shaft - This is the latest style of popshaft that no longers uses the boot #276484.
Boot for this propshaft is TVE100000
 
 
  Rear Propshaft 88"  
  Ref: FRC4907 / Price $165.00  
  Application: Series 88" 4 cylinder, grease nipples on both UJ's
 
 
  Rear Propshaft 109"  
  Ref: FTC3245 / Price $179.00  
  Application: Series 109"
 
 
  Flange - Propshaft  
  Ref: 600656 / Price $39.95  
  Application: Series 1964 - 1984
 
 
  Splined End - Propshaft  
  Ref: 601790 / Price  
  Application: Series II, IIA and III, 88" and 109"
 
 
  Propshaft Bolt - 3/8UNF X 1"  
  Ref: 509045P / Price $0.65  
  Application: series (all) 1958-1984
 
 
  Propshaft Bolt - 3/8UNF X 1 7/32"  
  Ref: 509046 / Price $0.70  
  Application: series (all) 1958-1984
 
 
  Propshaft Bolt Kit  
  Ref: DA1123 / Price $4.50  
  Application: Series - Consists of 509045 (4) and NZ606041L (8)
 
 
  Nyloc Nut 3/8 UNF  
  Ref: NZ606041L / Price $0.45  
  Application: series (all) propshaft nut
 
 
  Propshaft Tool 3/8in Drive  
  Ref: DA1065 / Price $36.95  
  Application: Series (all)
 
 
  Replacement Universal Joint Kit  
  Ref: RTC3291G / Price $24.95  
  Application: Series 1 and Series 2/2A to approximately 1964.
Description: Universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").
 
 
  Universal Joint Kit OE GKN  
  Ref: RTC3346G / Price $25.95  
  Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.
Description: Universal joint repair kit including 4 circlips and a grease nipple by GKN - Approx distance between faces 3 1/4"
 
 
  Universal Joint Kit - Allmakes  
  Ref: RTC3346 / Price $10.95  
  Application: Late Series 2A, Series 3, Classic Range Rover to 1985 and early 90/110.
Description: Replacement universal joint repair kit including 4 circlips and a grease nipple. Approx distance between faces 3 1/4"
 
 
  Propshaft UJ Clip  
  Ref: 242522 / Price $1.09  
  Application: all - Propshaft and Halfshaft
 
 
  Replacement Propshaft Gaiter Kit  
  Ref: 276484 / Price $5.95  
  Application: Series 1, Series 2/2A, Series 3, early 90/110, Classic Range Rover.
Description: Replacement gaiter and 2 clips for sliding joint on front and rear propellor shafts.
 
 
  Gaiter - Propshaft Sliding Joint  
  Ref: TVE100000 / Price $5.20  
  Application: Series - Later Style Propshafts
 
 
  Seal Kit Gearbox  
  Ref: ZZSEALKITGBOX / Price $36.95  
  Application: Series (all) all rubber seals for a complete gearbox rebuild in a simple kit. Oil seals are highest quality "Corteco" brand
 
 
  Flange Gasket Front Output Shaft  
  Ref: FRC1511 / Price  
  Application: Series II and III - no longer available at a sensible price - use kit 600603 - cheaper!!!
 
 
  Seal: Output Shaft Front & Rear  
  Ref: FRC1780G / Price $5.15  
  Application: Series II & III, Corteco Brand
 
 
  Seal: Output Shaft Front & Rear  
  Ref: FRC1780 / Price $3.45  
  Application: Series II & III, Allmakes Brand
 
 
  Mudshield - Output Shaft Gearbox  
  REf: 236074 / Price $14.30  
  Application: Series (all)
 
 
  Oil Seal  
  Ref: 622042 / Price $2.95  
  Application: series II & III felt oil seal for rear of output shaft
 
 
  Output Shaft Washer  
  Ref: FRC6461 / Price $3.95  
  Application: Series excluding V8
 
 
  Gasket Set Gearbox  
  Ref: 600603 / Price $6.00  
  Application: Series 2 + 3
 
 
  Transfer Box Sump Gasket  
  Ref: FRC1516 / Price $1.55  
  Application: Series (all) - uses stud part number 90212104, nut #3419 and spring washer WM600041L - Cork NLA
 
 
  Gasket  
  Ref: 622048 / Price $0.99  
  Application: Series Transfer box output housing gasket
 
 
  Gasket - Clutch Housing  
  Ref: 213663 / Price $0.95  
  Application: Series II and IIa - Suffix A Box only
 
 
  Gasket - Clutch Housing  
  Ref: 528697 / Price $0.75  
  Application: Series IIa - Suffix B Box onwards
 
 
  Gasket  
  Ref: 576724 / Price $0.95  
  Application: Series Series III not Stage One - Clutch Sleeve Housing to Bellhousing
 
 
  Gasket - Transfer Box to Gearbox  
  Ref: 622046 / Price $0.95  
  Application: Series (all) incl 1 Ton
 
 
  Transfer Box Gasket  
  Ref 230140 / Price $1.75  
  Transfer Box Plate Gasket series 2.25
Dimensions 3 1/16" X 4 7/16"
 
 
  Gasket - Transfer Gear Change  
  Ref: FRC7007 / Price $1.99  
  Application: Series 1948 - 84
 
 
  Gasket - Rear PTO  
  Ref: 622047 / Price $0.99  
  Application: Series (all)
 
 
  Gasket Set LT95  
  Ref: 606754 / Price $12.95  
  Application: Series Stage One 109 - Stage One 4 speed gearbox
 
 
  Bolt - Rear Output Flange  
  Ref: 90512701 / Price $0.75  
  Application: Series (all)
 
 
  Nut 3/8 Rear PTO Plate  
  Ref: NH406041L / Price $0.67  
  Application: Series - many
 
 
  Washer Drain Plug  
  Ref: FRC4835 / Price $0.85  
  Application: Series II & IIa, washer for drain plug differential housing
Description: Sealing washer ID 1.0" OD 1.5"
 
 
  Gasket - Bell Housing S1, 2 & 3  
  Ref 622045 / Price $1.17  
  Application: Series (all)
 
 
 
 
     
  Series - Gearbox & Propshaft - Page 1 <> Page 2 <> Page 3
     
  Engine <> Flywheel & Clutch <> Gearbox & Propshaft <> Axles Suspension and Steering <> Brakes & Brake Controls <> Fuel, Exhaust, Emmission Systems <> Cooling & Heating <> Electrical, Washers-Wipers, Instruments <> Chassis, Subframes, Bodyshell, Fittings <> Facia, Trim, Seats and Fixings <> Screws, Nuts, Bolts